Thanks Bill.. next question, I may have found a PCM from a '99 Durango;
could that work? Or would that 5spd confuse it to much?
Aaron
----- Original Message -----
From: "Bill White" <b1llyw@att.net>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, March 14, 2010 5:59 PM
Subject: Re: DML: Engine swap
>
> You will need a 5.9l flywheel from a 93 to 02 5.9 gas 5-speed truck, Ram
> 2500 or 3500, to get the correct balance.
>
> Bill White
>
> --- On Sun, 3/14/10, Aaron Wyse <awyse@sw.rr.com> wrote:
>
> From: Aaron Wyse <awyse@sw.rr.com>
> Subject: DML: Engine swap
> To: dakota-truck@dakota-truck.net
> Date: Sunday, March 14, 2010, 7:37 PM
>
>
> OK guys I know there 200 threads and it's been brought up umpteen times..
> I just got a lead on a '98 5.9L.. ran when pulled, needs basic
> refresh.
>
> It's new home is destined to be a '94 Dak 5spd.. This truck was a 2.5L..
> I already swapped to 3.9Ltrannys were the same, so I just used the one
> with less miles and swapped the bellhousing.
>
> What PCM would you recommend I located for the swap. From what I've heard
> I can use the sames harness just splice in the connectors for the
> other 2 injectors, is that correct as well.
>
> Can I just move my flywheel from the 3.9L to the 5.9L?
>
> Thanks in advance..
>
> Aaron
>
>
>
This archive was generated by hypermail 2b29 : Thu Apr 01 2010 - 00:17:53 EDT