You will need a 5.9l flywheel from a 93 to 02 5.9 gas 5-speed truck, Ram 2500 or 3500, to get the correct balance.
Bill White
--- On Sun, 3/14/10, Aaron Wyse <awyse@sw.rr.com> wrote:
From: Aaron Wyse <awyse@sw.rr.com>
Subject: DML: Engine swap
To: dakota-truck@dakota-truck.net
Date: Sunday, March 14, 2010, 7:37 PM
OK guys I know there 200 threads and it's been brought up umpteen times.. I just got a lead on a '98 5.9L.. ran when pulled, needs basic
refresh.
It's new home is destined to be a '94 Dak 5spd.. This truck was a 2.5L..
I already swapped to 3.9Ltrannys were the same, so I just used the one with less miles and swapped the bellhousing.
What PCM would you recommend I located for the swap. From what I've heard I can use the sames harness just splice in the connectors for the
other 2 injectors, is that correct as well.
Can I just move my flywheel from the 3.9L to the 5.9L?
Thanks in advance..
Aaron
This archive was generated by hypermail 2b29 : Thu Apr 01 2010 - 00:17:53 EDT