Scott Lane wrote:
> Tom, he might be able to see the drum size by looking thru the wheel.
> I can on my 98. Just a thought.
>
> Rascal
Ahh you do have a valid point... if its possible to see the minimum
thickness numbers that are cast into the drum, then it may be possible
to determine the drum size. If the min. thickness specs are something
like 9.015 or whatever - then you know you have a 9 inch drum... like
wise if it lists something like 10.whatever... you have a 10 inch
drum... but... that at the very least may require removing a wheel!
Depending on the rim, it may not be possible to see the run out specs.
-- TerribleTom
This archive was generated by hypermail 2b29 : Tue Jun 01 2010 - 09:37:17 EDT