Starting issue solved....

From: Jim (conv442@earthlink.net)
Date: Tue Feb 15 2011 - 00:33:23 EST


Well crawled under the truck today (finally a warm day in the peeple's
republik of MA)and discovered that the solenoid wire wasn't fully clicked
into the socket. Made me wax nostalgic for the days of holding a 40#
starter up while using a proper fastener (aka a nut with attached serrated
washer over an eye socket on the solenoid wire to attach to the stud on the
starter).

Driveway was too damp with snow melt to bother doing the thermostat which
may be the problem with the heater....assuming it's not closing when it
should and isn't providing enough back pressure for the heater core to get
water.....

Jim



This archive was generated by hypermail 2b29 : Tue Mar 01 2011 - 19:18:32 EST