Re: Oil Dipstick tube replacement

From: Gary Hedlin (
Date: Sun Sep 25 2011 - 00:52:44 EDT

Probably what you need to do is take a small punch and see if you can bend
in one of the sides of the tube and then yank it with a pair of needle-nosed

P.S. I still have your replacement tube. :)


On Sat, Sep 24, 2011 at 5:17 PM, Chris Reck <> wrote:

> I need to remove the oil dipstick tube from the housing. It broke off
> right at the bottom of the tube, where it goes into the housing. I have
> nothing to grab onto. Is this something that I can get at by dropping the
> oil pan and pushing it out from underneath?
> --
> Chris Reck
> Naperville, IL
> >> '99 Dakota Sport + CC 4x4 V6 (Deep Amethyst)

Gary Hedlin
Show Car Signs by Hedlin Designs

--Many talk about those who died, but too few talk about those who survived... THANK A VET!

This archive was generated by hypermail 2b29 : Sat Oct 01 2011 - 11:35:32 EDT