& From: Andre Mauboussin <andrem@cyberramp.net>
& Subject: Re: Exhaust systems
&
& buying the Gibson. Also, the biggest restriction in the stock system is
& the crossover pipe which is pinched on the driver's side and of very
& puny diameter pipe. I replaced it with 2 1/4" pipe from the manifolds
& into a dual 2 1/4" x 3" Flowmaster Y pipe into a highflow 3" Cat. That
& coupled with the cat back system was worth 3 1/2 to 4 tenths in the
& quarter mile. Before I built my system I made numerous phone calls to
& exhaust engineers and Magnum performance who has dyno tested many
& different configurations and found this one to be the best.
Does anybody know if the MOPAR Y-pipe sold for use with the MOPAR
headers will bolt onto the stock manifolds?
P.S. I got the new Summit Catalog and they now carry most of the MOPAR
goodies for the Dakota. I haven't yet compared prices to the MOPAR catalog.
*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
Frank Ball 1UR-M frankb@sr.hp.com (707) 794-4168 work
Hewlett Packard (707) 794-4848 fax (707) 538-3693 home
1212 Valley House Drive Kawi KDX200, Yamaha XT350 YZF600R Seca 750
Rohnert Park CA 94928-4999 '95 Dakota SLT Club Cab V8 5-Speed 2WD
*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:25 EDT