From: cwinnerman@earthlink.net@INTERNET on Mon, Sep 23, 1996 9:47 PM
>I tried getting the trouble codes form my 1992 by turning the key. Turn
>the key to the one position. Then off and on and off and on again
>within 5 seconds. Wait a couple of seconds and your check engine will
>begin to flash. It should flash 8 times pause and 8 times. (88 means
>start test.) If you have codes stored it will flash the code numbers.
>It will then flash 55 which means end of test. This procedure and the
>trouble codes are listed in my owners manuel. When I tried it I only
>got the code 55. It never flashed 88 at the beginning.
There is no 88 code, CC systems do not use a start of test signal. 55 is the
only code you should get when there are no codes stored.
Dave Clement
89 4x4 LE
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:25 EDT