----------
> From: Alan Casey <acasey@io.com>
> To: dakota@sseg.ait.fredonia.edu
> Subject: TAD results
> Date: 17 декабря 1996 г. 9:27
>
> Thanks for ya'lls input on the traction bars. I picked up a cheapy
> pair of Lakewoods at AutoZone for the track. They don't fit right so I
need
> to order some shims from Mr. Gasket. I will let yall know the results.
>
I found if you place the rear brace(where the u-bolts run through) on the
rear of the spring plate, you will get the desired angle. Also I have
placed a 3/4" piece of conveyor belt between the brace and the spring. I
think the first occurance works best.
Also, there is a Black and White ad in Mopar Action that sells Universal
Traction bars that replace the spring plate under the springs where the
U-boltz run through. This would make for a low profile look
Kendall
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:28 EDT