Hey Keith;
Just grab firmly, and pull (assuming you have all the other screws out).
Yes I removed mine, but I wouldn't recommend throwing it away, like a
certain 'Meldrum Guy' did... 8^)
===================='97 Dakota SLT+=====================
L. John Morris<ljohn@alltel.net>
!!!!! ... your local *HEMI* owner ...!!!!!
White/Driftwood/CC/4x4/5.2L/5spd/3.92SG/FIPK clone
*Edelbrock* marketing sucks
==================== Reply Separator ====================
----------
> From: Keith R Wanderi <keith.wanderi@fsg.deluxe.com>
> To: 'Dakota Mailing List' <dakota@ait.fredonia.edu>
> Subject: 97 K&N Owners
> Date: Tuesday, May 27, 1997 1:27 PM
>
> Well, I've installed a K&N on my 97 and it's a keeper.
> My question to everybody is -
>
> Did you remove the stock filter box?
> if so, how??
>
> I looked at removing mine just to get more air flow in the engine
> compartment and just more room in general. I tried to remove the hold
down
> stud at the bottom of the box by turning it out. Doesn't seem to have
any
> effect. How does that hold down and one in front of the box come out?
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:41 EDT