Re: Tire Rotation

From: L. J. Morris (ljohn@alltel.net)
Date: Mon Jun 02 1997 - 19:22:34 EDT


He** Bill no wander ya have to work so hard, if ya gotts a Cheby work truck
you probably only make it to half the jobs, and I'm being generous with the
number of jobs ya get to. Ya probably spend more time lugging the tools
around in a back pack on foot to the jobs, 'cause the truck is broke down.
Ya otta just park the truck out beside the shop and use the bed for
recyclable material, but be careful the junk man may take the truck too. he
.. he ;^)

BTW, how'd you see that post about the auto, figured ya would miss it,
since you are in digest mode. darn :-P
===================='97 Dakota SLT+=====================

                           L. John Morris<ljohn@alltel.net>
                        !!!!! ... your local *HEMI* owner ...!!!!!
           White/Driftwood/CC/4x4/5.2L/5spd/3.92SG/FIPK clone
                                     *Gibson* on the way
==================== Reply Separator ====================

----------
> From: WillTier@aol.com
> To: dakota@ait.fredonia.edu
> Subject: Re: Tire Rotation
> Date: Monday, June 02, 1997 6:52 PM
>
> OK my Dak book shows only four wheel rotate but My company truck (96
> Cheby)show the following. The spare goes to the right rear, right rear to
> right front, right front to left rear, left rear to left front and left
front
> to spare. Might not work on a Dak, you know something with moorrree
> Pooowwweeerrr. Ho Ho So you left me do the A** thing, nice guy...
>
> Bill

 



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:43 EDT