Re: Throttle Body Mods

From: Sean Meldrum (spm@c3net.net)
Date: Mon Jul 14 1997 - 00:27:29 EDT


At 11:38 PM 7/13/97 -0400, you wrote:
>In a message dated 97-07-13 22:36:56 EDT, you write:
>
><< No, although that *is* done on some tbi mods. The article I read simply
> did the .080" cleanup which is exactly what we've been talking about and/or
> doing. Increase 48mm bore to 50mm. >>
>ok so how do i do this??? obviooulsly noty get a 50 mil drill
>bit........today i took all the ridges out of the top of the throttle body
>and and kinda smoothed them into the ports a bit.......i had no MIL lamp and
>it ran fine so obvioulsy that did no good (i think).......maybe i'll just
>remove the throttle body all together and let it run at full throttle......;)
>
>Russ
>
>

If you removed the ridges you're right about at 50mm now.
*******************************97 Dakota Sport*******************************
  sean meldrum

email: Home: spm@c3net.net (list subscription)
                  Work: sean_p_meldrum@auto.ittind.com

Homepage: http://www.geocities.com/MotorCity/Downs/7875/

 Black, 318, 5spd, 3.55SG, reg. cab, 2wd, buckets
"Fresh air by Meldrum"
All exterior vinyl graphics removed
Moroso Blue Max plug wires and Spectre looms
DynoMax Race Magnum Welded. 3" in/out, exiting before axle.
MSD 6A & Blaster 2 coil w/ chrome cover
****************************************************************************
****



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:48 EDT