Michael Meyerhoff wrote:
>
> I still don't have my subs. They don't know when they'll get any 8w1s in
> to replace the 8w2s they sold me (the guy says the w2s will work even
> though JLAudio "doesn't recomend" it (I don't go for it). They offered me
> a 8w6 but i don't think i have the mounting depth for it (the magnets on
> w6s are HUGE) so i'm waiting, still.
>
> (for those of you who don't know JLAudio's product line; W0 arnt out yet,
> W1 are no longer in production, w2 won't work in a sealed inclosure, and W6
> are thier competition series $$$$ )
>
> I went ahead and bought a wiring kit (Any tips for running it??). I'm
> gonna run the wires now for lack of anything else to do. I'll put the
> RCA's on the passenger side, and the power on the drivers side. I have
> some pressure tubing from work just big enough for the 8ga power wire to go
> through. I'm gonna run the wire under the cab and come up right into the
> side compartment where i'll put the amp. The kit I bought came with the
> fuse mount with a loop of wire on it. This means i'll have to cut the loop
> and use the splice connecter they supplied to connect it to the rest of the
> wire. Why'd they do it that way instead of just putting it on one end of
> the power cable??
>
> This whole process is starting to get to me. Estimated first turn on; 2010.
>
> Michael Meyerhoff
> Sophomore Civil Engineering Student at
> the University of Missouri at Rolla
>
>
> mmeye@umr.edu
> Homepage http://www.umr.edu/~mmeye
> Mopar Territory http://www.umr.edu/~mmeye/mopar.territory/frntpage.htm
>
> Home Phone # 1 618 939 3717
> Cellular Phone # 1 314 960 4736
> Dorm Phone # 1 573 341 8757
> DORM
> 107 Thomas Jefferson
> Rolla, MO 65401
> HOME
> 413 Adams Drive
> Waterloo, IL 62298
>
Are you sure they dont have w0's. the 12's i have are wO's.
run your amp in mono and bridge the speakers to the amp.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:48 EDT