If you're using Corel 7, then do a "File, Export" and select JPG. If its
still a "no go", email me the CDR file and I'll send you back a JPG...
Craig
> -----Original Message-----
> From: WillTier@aol.com [SMTP:WillTier@aol.com]
> Sent: Sunday, July 20, 1997 9:19 PM
> To: dakota@ait.fredonia.edu
> Subject: Re: read this on TBI mods
>
> In a message dated 97-07-20 15:12:39 EDT, you write:
>
> << Bill this sounds cool, please convert it to a jpg file and send it
> to me
> at rockvalley@prodigy.net
> Thanx
> Mike Cabe >>
>
> I checked the Corel program and do not see and option to save as a
> JPG. I
> tried to scan it and save it as a JPG but it didn't come out too good.
> I can
> save it as : CDR, WPG, WMF, EMF, CGM, DXF, GEM, PF type files if you
> can use
> any of those. I can also send the image of the plane with the Dakota
> cloned
> in as the cockpit but without the text and you could import it in and
> add
> your own text if that would work for you. Also if you are going to put
> this
> on a shirt then you will need to "flip or Mirror" it to print
> backwards so it
> will come out properly on the shirt. Let me know if any of this will
> work for
> you and I'll do what I can.
>
> Bill
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:48 EDT