On 09/26/97 20:59:04 you wrote:
>
>According to the factory manual, the "on-off-on-off-on" sequence must be
>performed within 5 seconds, start to finish.
>Here' another little "fun" thing you can get your on board computer to do
>:
>Press in on the button that toggles between "trip" and "odometer" (97 and
>
>up), as you turn the key to the "on" position (not start). Watch the
>digital odometer. In a few seconds the letters "CHCK" will appear.
>
>Release button.
>Computer will proceed to test all instrument panel functions, odometer
>digit segments, gauge movements, etc.
>You have to tap the trip button between each group of test.
>When your actual mileage appears in the display, and the chime rings, the
>
>test series is over.
>
>Gary Ludwick
I finally got my '97 to do the check...not the check that Gary mentioned, the other one. I got a
code 55 which I think means everything is ok.
Dave Thede
'97 Dakota Sport CC V8/5-spd 4x4
K&N FIPK clone
Gibson dual cat-back on order
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:53 EDT