Do the body lift. I saw a Dakota where the owner had cut the fenders and
installed Bushwhacker fender flair's from a full size RAM. I looked hacked.
Walter_Felix@MSN.COM
http://www.geocities.com/MotorCity/Downs/9219
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net On Behalf Of bukchsr@aol.com
Sent: Saturday, November 15, 1997 5:56 AM
To: dakota-truck@buffnet.net
Subject: DML: 92 Dak fender wells
I just had a 4 inch Trailmaster suspension lift installed on my 92
Dak 4x4 and added 33x12.50 Cepek Mud tires. On off-road driving,
the tires rub on the fender wells when I'm turning sharply or if I
drive over ruts or mounds at 7+ mph. I don't know if I should install
a 2 inch body lift kit or if I should trim my fender wells. My main
concern with trimming my fender wells is that if I do it, it could
look like I did it with a can opener. Any suggestions or considerations?
Thanks.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:57 EDT