1) I didn't personally install mine. I'm not exactly mechanical, but I
try. Any way, to install them, support the truck on jack stands, remove the
rear axle from the leaf springs, and lower the truck with the jacks. Fit
the blocks between the axle (now above than the leaf springs) and replace
the axle on the leaf springs with the supplied longer u- bolts.
2) As for lowering it further than 2", you could get 3" lowering blocks, or
add hangers or shackles, both of which raise the leaf springs on the body,
lowering the body. For better, basic information with pictures, look here:
http://www.sportruck.com/howto/suspension.htm
Robert Trottmann
rotrottmann@davidson.edu
JAMES HAGSTROM wrote:
> ** Low Priority **
>
> With the lowering blocks can the truck be lowered more than 2" and how
> do you install them? Can you do it in you driveway without major tools?
>
> Jim
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:07 EDT