Marc wrote:>> The transmission in the vehicle must be made to accept
the PTO. All > NP435's (older 4speeds) have the plate, as do all the
NP205 Xfercases.<<
>>I'm thinking about a "project truck" which would greatly benefit from
a
PTO. Do you know offhand which trucks and years these transmissions and
transfer cases would have been used in? Thanks.<<
Not exactly, but somewhere around the early to mid '70's, in FOMOCO's
as
well as Dodge. Look for a plate on the passenger side that is approx
5X7 inches rectangular. Or look under any wrecker (or probably
carhauler)
to see how the cable winches are pulled. This will give you an idea of
what you are looking for in a transmission or xfercase.
Also all the larger (1 1/2 ton and above) trucks have transmissions that
will accept PTO's. These would give you the picture of the plate you
are
looking for. Keep in mind, you must purchase the PTO for the Specific
tranxmission. They do not interchasnge - and they are quite costly.
Azie
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:13 EDT