The hood is $450 and that's all you can get from them. You'll have to
make your own box to seal off the FIPK.
Richard Collins
> ----------
> From: Stacy Clark[SMTP:clar8883@dpnet.net]
> Reply To: dakota-truck@buffnet.net
> Sent: Wednesday, February 18, 1998 7:32 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Pro Glass
>
> HoCollins, Richard wrote:
> >
> > The hood isn't specific to your engine so yes, you can use it on any
> 97+
> > Dakota. However, the Ram Air aspect of it won't do you much good
> unless
> > you develop some sort of setup to use the ports on the hood like the
> > sealed box around an FIPK or something else. It'll improve HP and
> gas
> > mileage if you set it up right.
> >
> > Richard Collins
> >
> > > ----------
> > > From: Stacy Clark[SMTP:clar8883@dpnet.net]
> > > Reply To: dakota-truck@buffnet.net
> > > Sent: Tuesday, February 17, 1998 8:51 AM
> > > To: dakota-truck@buffnet.net
> > > Subject: Re: DML: Pro Glass
> > >
> > > david peterson wrote:
> > > >
> > > > No, the sealed box is custom designed by Terry at Proglass.
> > > > Kawi@hotmail.com
> > > >
> > > > >Date: Mon, 16 Feb 1998 19:05:10 -0600
> > > > >From: Robert Trottmann <rotrottmann@davidson.edu>
> > > > >Subject: Re: DML: Pro Glass "Ram Air" Hood Info
> > > > >To: dakota-truck@buffnet.net
> > > > >Reply-To: dakota-truck@buffnet.net
> > > > >
> > > > >Does it come with the sealed box, or is that extra?
> > > > >
> > > > >Collins, Richard wrote:
> > > > >
> > > > >> Ok, for those of you interested, here's the contact info for
> Pro
> > > > Glass:
> > > > >>
> > > > >> Pro Glass
> > > > >> 11128 E CR 100 S
> > > > >> Avilla, IN 46710
> > > > >> (219)897-2597
> > > > >>
> > > > >>
> > > > >> I have photos of an install with the hood, etc from Power
> Wagon
> > > and
> > > > >> Sport Utes magazine scanning now so they'll be up on a WWW
> page
> > > in
> > > > less
> > > > >> than an hour from now. You can check them out at:
> > > > >>
> > > > >> http://www.ccmangum.com/collinsr/dakota/
> > > > >>
> > > > >> Later!
> > > > >>
> > > > >> Richard Collins
> > > > >> 98 CC 318 3.55LSD FIPK
> > > > >>
> > > > >>
> > > >
> > >
> ----------------------------------------------------------------------
> > > --
> > > > >>
> > > > >> Part 1.2 Type: application/ms-tnef
> > > > >> Encoding: base64
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > > ______________________________________________________
> > > > Get Your Private, Free Email at http://www.hotmail.com
> > > is his hood and ram air hook up available for the V-6???? and how
> much
> > > does the enire system cost??? What all does is improve???
> > >
> w much f
>
> How much for the entire set up ?????
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:13 EDT