The FIPK seal is availible from Terry at Proglass for the V8. If you
have a V6 much like myself you will have to be handy in fiberglass work.
David Peterson
>From: "Collins, Richard" <collinsr@ccmangum.com>
>To: dakota-truck@buffnet.net
>Subject: RE: DML: Pro Glass
>Date: Thu, 19 Feb 1998 08:32:28 -0500
>Reply-To: dakota-truck@buffnet.net
>
>The hood is $450 and that's all you can get from them. You'll have to
>make your own box to seal off the FIPK.
>
>Richard Collins
>
>> ----------
>> From: Stacy Clark[SMTP:clar8883@dpnet.net]
>> Reply To: dakota-truck@buffnet.net
>> Sent: Wednesday, February 18, 1998 7:32 PM
>> To: dakota-truck@buffnet.net
>> Subject: Re: DML: Pro Glass
>>
>> HoCollins, Richard wrote:
>> >
>> > The hood isn't specific to your engine so yes, you can use it on
any
>> 97+
>> > Dakota. However, the Ram Air aspect of it won't do you much good
>> unless
>> > you develop some sort of setup to use the ports on the hood like
the
>> > sealed box around an FIPK or something else. It'll improve HP and
>> gas
>> > mileage if you set it up right.
>> >
>> > Richard Collins
>> >
>> > > ----------
>> > > From: Stacy Clark[SMTP:clar8883@dpnet.net]
>> > > Reply To: dakota-truck@buffnet.net
>> > > Sent: Tuesday, February 17, 1998 8:51 AM
>> > > To: dakota-truck@buffnet.net
>> > > Subject: Re: DML: Pro Glass
>> > >
>> > > david peterson wrote:
>> > > >
>> > > > No, the sealed box is custom designed by Terry at Proglass.
>> > > > Kawi@hotmail.com
>> > > >
>> > > > >Date: Mon, 16 Feb 1998 19:05:10 -0600
>> > > > >From: Robert Trottmann <rotrottmann@davidson.edu>
>> > > > >Subject: Re: DML: Pro Glass "Ram Air" Hood Info
>> > > > >To: dakota-truck@buffnet.net
>> > > > >Reply-To: dakota-truck@buffnet.net
>> > > > >
>> > > > >Does it come with the sealed box, or is that extra?
>> > > > >
>> > > > >Collins, Richard wrote:
>> > > > >
>> > > > >> Ok, for those of you interested, here's the contact info for
>> Pro
>> > > > Glass:
>> > > > >>
>> > > > >> Pro Glass
>> > > > >> 11128 E CR 100 S
>> > > > >> Avilla, IN 46710
>> > > > >> (219)897-2597
>> > > > >>
>> > > > >>
>> > > > >> I have photos of an install with the hood, etc from Power
>> Wagon
>> > > and
>> > > > >> Sport Utes magazine scanning now so they'll be up on a WWW
>> page
>> > > in
>> > > > less
>> > > > >> than an hour from now. You can check them out at:
>> > > > >>
>> > > > >> http://www.ccmangum.com/collinsr/dakota/
>> > > > >>
>> > > > >> Later!
>> > > > >>
>> > > > >> Richard Collins
>> > > > >> 98 CC 318 3.55LSD FIPK
>> > > > >>
>> > > > >>
>> > > >
>> > >
>>
----------------------------------------------------------------------
>> > > --
>> > > > >>
>> > > > >> Part 1.2 Type: application/ms-tnef
>> > > > >> Encoding: base64
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > >
>> > > > ______________________________________________________
>> > > > Get Your Private, Free Email at http://www.hotmail.com
>> > > is his hood and ram air hook up available for the V-6???? and how
>> much
>> > > does the enire system cost??? What all does is improve???
>> > >
>> w much f
>>
>> How much for the entire set up ?????
>>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:13 EDT