Thanks much for the offer, but the manual is pretty good on this
operation. I know how to change pads after reading it, I just don't
know if I can do it.
Thanks again,
Robert Trottmann
rotrottmann@davidson.edu
Walz2@AOL.COM wrote:
> I have just changed brakes on my dakota and it was quite simple.
> after taking off the wheel there are only two other bolts to loosen.
> Then just replace the pads, bleed and your done. if you want
> a detailed description i'll be happy to help. You'll save alot of
> $$$$
>
> mark
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:15 EDT