> Correct me if I'm wrong but to retract the wheel cylinders you have to
> loosen the nipple and bleed enough brake fluid out to let it retract far
> enough to put new pads on
Nah. Just get a C-clamp and squish the piston back into it's bore a little
bit. It's even possible to do this on some vehicles by hand (helps to loosen
the master cylinder reservoir cover), but I haven't rebuilt my Dak's brakes
yet.
Ron
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:15 EDT