On Thu, 30 Apr 1998 20:20:19 EDT WillTier
<WillTier@AOL.COM> wrote:
>In a message dated 98-04-29 17:10:26 EDT, you write:
>
><< .To
> get the trans to shift into and out of overdrive he
> used a toggle switch wired to ground.Close the switch
> when you want overdrive.Open switch will be third gear.
>>
>
>Hey Karl would that work on the Daks?? I thought it went
through the
>computer
>using some tricky setup ??
>
>Bill
>
The switch on the dash sends a signal to the SBEC when you
pish it. The SBEC than sends a high signal to the trans to
keep it in third. You could change the switch in the dash
and wire it to the trans for imedate control of the trans.
Karl Moltzan
92 CC 4X2 5.2L 4/5RT(stock cam)
1.7Crower, Electric Fans
DTs,Stock coil
B&M Shifter 4200lbs
15.054@90.124
kmoltzan@mymail.net
Dallas Texas
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:39 EDT