>Which Comp Cams cam is it? What are the specs on it?
>Brad
Not sure Brad. Patrick...you out there? Specs..if I remember 'em
right...were 210/220 duration @ .050" and .512"/.512" lift with 112 degrees
lobe separtion. Don't know the intake centerline. This cam would probably
be a thumper in a 318 since it's a 5.9L grind.
I'm gonna post a better .jpg that I ran again. This one will have the Comp
Cam shown as the solid line which will also have the hp & tq figure in the
table to the right. The dashed graph is a little more representative of
the Dak stock power curve. The solid line is the cam and a free flow
exhuast (doesnt' make sense to put more air in if it can't get out).
Pretty damn impressive. This is only a comparison tool remember...but it
gets ya wondering...
Pic is at http://www.geocities.com/MotorCity/Downs/7877/cam3.jpg
*** 97 RPM Dakota - 14.98 @ 91.76 *** http://surf.to/real-per4mance ***
sean meldrum
Email @ Home: spm@c3net.net
Email @ Work: sean_meldrum@ittauto.com
Truck mods: http://www.geocities.com/MotorCity Downs/7875/signature.txt
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:49 EDT
