Instrument Panel Self-Diagnostic begins on page 8E-12.
OBD Error Code retrieval begins on page 25-1.
(This is from the 1998 Dakota FSM)
gk
________________________________________________________________________
Gary E. Klim - Somewhere In Connecticut mailto:garyklim@snet.net
http://pages.cthome.net/garyklim/ mailto:gklim@harman.com
________________________________________________________________________
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of t martin
> Sent: Sunday, June 14, 1998 7:56 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: RE: Dak Trouble codes
>
>
> What page in the factory service book, please?
>
> --tm
>
> ----------
> > From: svieth@ameritech.net
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: RE: Dak Trouble codes
> > Date: Saturday, June 13, 1998 4:36 AM
> >
> > > The Trip Odo routine is only for instrument cluster "self check". You
> have
> > > to have the Chrysler scan tool to read error codes. There doesn't seem
> to be
> > > any aftermarket support yet for '97-'98 models as far as scan
> tools are
> > > concerned. The Chrysler tool is approximately $3,500 if I remember
> > > correctly.
> > >
> > > gk
> >
> > Huh? What about flipping the ignition on and off as detailed in the
> > factory service manual? That will display the diagnostic trouble
> > codes. I'll do it for you for only $1750, that's half-price!!!
> >
> > Read the book.
> >
> > =Scott
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:56 EDT