>>Craig wrote:
A few people do make wheels for the Viper (the 10" from the front of the
Viper seem to fit ok on the Dak (just tried them quickly, didn't
actually run them on the truck as I only have 2...). Manufacturers
include (ones I can think of right off the top of my head)...
* Forgeline
* Kinesis
* HRE
* Speedline
Most of these run around $3K-4.5K for a set of 4...<<
Craig,
I've been contemplating the 10" Viper rim over the last few months. They
fit perfectly on the 4x4 suspension components, mainly due to the
reduced knuckle size and narrower upper A-arm. When you say they fit do
they just clear the top of the upper knuckle and A-arm by 1/4" or 1/2"?
I sort of guestimated that on the 4x2 the front inner rim edge would be
about 1/4" above, but the turning may be hindered by the edge of the
A-arm.
Both the front 10" and rear 13" seem to have 4"(+1.5" f/s over stock)
front space which should fit well with the 97 flare extensions. Has
anyone else been thinking this way (if money were no object) ?
Garth
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:59 EDT