It sounds like the Crane Boost dial thingy isn't working. Your truck will
still run but the timing will not be dialed back under full throttle I
suspect. You will probably get detonation. Check to see if it is hooked
up correctly first.
Dan
----------
> From: Kabuki2@aol.com
> To: dakota-truck@buffnet.net
> Subject: DML: The Vortech is ON!!!!
> Date: Thursday, July 09, 1998 6:03 PM
>
> The Vortech is on my truck. Problem tho, the gauge kits I aquired from
A&E
> didn't have the right fitting.. <sigh> :( .. no boosting until
tomarrow....
>
> I drove the truck around limiting myself to half throttle and 3000 rpms
and it
> has alittle extra, even down low .. can't wait to dip in it all the way
.
>
> free revving the motor (again, same limits.. no full throttle) and it
seems to
> rev alot faster too ..
>
> one problem, the crane's adjustable boost dial thingy.. the light isn't
on. It
> must work, because the truck runs.. but no light? any ideas??
>
> will let everyone know how she runs WFO. :)
>
> ttyl
> patrick
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:04 EDT