At 12:40 PM 7/15/98 -0400, you wrote:
>Jon Steiger wrote:
>> If I get shorty headers, I'm thinking about ordering this Y pipe:
>>
>> http://www.geocities.com/MotorCity/Downs/7877/atr1.jpg
Hello DAKsters,
Does anyone know how to contact the manufacturer of these down-pipes?
This link supplies a jpg file with no contact info. If they'll fit an
R/T, I'll consider a set. I don't mind hacking on them some, as I was
planning on building a set from scratch...
Later,
Russ Selkirk
>Date: Wed, 15 Jul 1998 12:27:48 -0500
>From: "Jim, Donna, Erin, and Brian" <leefam@wcc.net>
>Subject: Re: DML: ATR Y-pipe - via digest
>
>At 12:40 PM 7/15/98 -0400, you wrote:
>>Jon Steiger wrote:
>>> If I get shorty headers, I'm thinking about ordering this Y pipe:
>>>
>>> http://www.geocities.com/MotorCity/Downs/7877/atr1.jpg
>>
>>> No provisions in this puppy for the O2 sensor, and it comes without
>>>CARB E.O. exemption, so this won't do it for me.
>>> I don't mind yanking my homebrew FIPK off for annual inspection, but
>>>there is no way I'm putting a non-smog exhaust component on my '95.
>> Ron...look at the pic real close. Unless you called 'em and they said
>>it doesn't have it it's there. I can just make it out in the pick down at
>>the Y. There's no way they could sell these things without the bung there.
>>They're offroad rated cuz it's illegal to replace anything ahead of the cat
>>unless it's damaged or 50k+ miles...sumthin' like that.
>>
>>Unless yer inspectors use calipers I don't see how they'd even know this
>>wasn't the original piece.
-- '96 Black Impala SS '85 Silver Monte SS '98 Amethyst Dakota RC R/T - Port Neches,Texas ================================= NOTE: Anti-Spam Address! Please reply to: RAS002@worldnet.att.net =================================
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:06 EDT
