Jason, I've got a single 3"in/out Flowmaster on my 98 5.2L
Dakota. Its the 2 chamber model. I experienced an increase
in torque & horsepower with this system over the stock setup.
I think it was Truckin magazine who had an exclusive story
(mid 97) about Mopar engineers working on a 318 2WD RC Dakota.
They suggested the 3" single muffler setup for max torque and
HP along w/the Mopar TRI-Y headers, computer and maybe a cam
for an extra 50 HP.
Sense they did the homework, I chose to go their route. They
used a Mopar high perf. muffler (made by Gibson?) and 3"
tubing. I think I can find the magazine if you need the info.
To answer your original question, I thing it has been stated
that if you use a dual 3" system it will lose torque.
GS
98 5.2L 5spd 3.92sg
P&P TBI FIPK 3"Flowmaster w/TFX resonators
Tonneau
>
> I've read somewhere that the 3" tubing cuts down on low end torque(I plan on
> doing some towing someday).
> Is this true?
>
> Jason
> 98 CC, 4X4, V8
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:26 EDT