--On Sun, 27 Sep 1998 23:08:16 Jon Steiger wrote: >At 10:35 PM 9/27/98 -0400, you wrote: >>Hey people, where is the oil sending unit on the 5.2 and 5.9? I need to >>replace mine but not sure where it is! Sounds bad I know! Anyway, I cant >>seem to find it in the Chilton manual. HELP!! >>Thanks >>Eric >> > > Ya mean you don't have a FSM? :-) > > Well, I just looked in my '96 318 FSM, and it doesn't say either. >However, there is a picture of it with a few of the surrounding >components. Based solely on the drawing, it looks as if it is >at the back of the engine, on the right hand side, sort've >between the distributor cap and the back of the engine. > > I could be wrong. :-) (Its zoomed in, so its hard to tell what the >surrounding components are.) If you like, I'll scan in the pic and post >it on the web or e-mail it to you. The FSM did recommend using >a special tool (C-4597) which is an "oil pressure sending unit socket". >Honestly... sometimes I think you design guys just sit around trying to >think up components that'll need special tools. ;-) > > Anyway, lemme know if you want me to scan it in and wether I should >put it on the web or e-mail it to you. If you get back to me tonight, I >should be able to do it tonight (or tomorrow morning). Otherwise I might >not be able to do it until I get home from work tomorrow. > > > -Jon- > > .--- stei0302@cs.fredonia.edu ------------------------------------. > | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL | > | '96 Dodge Dakota v8 SLT CC (14.77@92.97), '96 Kolb FireFly 447 | > `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---' >
Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:07 EDT