Bridges, Bruce wrote:
> The one is stock, my R/Ts original equipment (other than the flipped air hat
> keeper). Franks has the shroud above the plates removed and that diameter
> is carried up to the "top" in an 8 deg angle (optimum angle). The bottom of
> the shaft was flattened and button head screws replace the stockers with a
> flush trim to the shaft. The bore below the butterflys was cleaned up with
> a surface finish around 32 microinch or better.
>bbridges@alarismed.com/">http://www.cs.fredonia.edu/~stei0302/WWW/DAKOTA/ATTACHMENTS/bbridges@alarismed.com/
Hey Jon, could you put this text in the same location? Or maybe we could
create a really simple HTML wrapper that would provide an explanation for
each picture. Need help?
Thanks,
Ron
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:31 EDT