On Tue, 27 Oct 1998 rking@jjsnack.com wrote:
> Actually there is some fabrication of vaccuum lines needed because the
> M1 sits LOWER than the original beehive. Also you will need to modify
> (grind) one of the A/C compressor mounts to accomodate the
> T-stathousing "gooseneck" (if you have A/C). I have handwritten
> schematic of the necessary "extra hardware changes" for the install
> (ie. tubing needed, t-segments, nipples, etc. ..)all available at a
> good hardware store or home center.
>
> Rob
>
Is this fabrication required for the M1 or the MPI? (or both?)
-Jon-
.--- stei0302@cs.fredonia.edu ----------------------------------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
`--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:10:47 EDT