Brian,
The tires fit just fine, but real close to the flares. I plan on
cranking the t-bars about .5-1.0 inches just to ensure clearance and
help level out the truck. I'll prob add 1" lift blocks in the rear to
make the weel wells looks less full.
Our trucks are near identical, I see you've got a 3.55 lsd; I've got
3.90 open. I have lost major acceleration off the line (didn't expect
to loose as much as I did). Once I figure out how many miles I'm
actually traveling, I expect to get about 22mpg or better highway.
Jon Smith
>Date: Mon, 16 Nov 1998 12:39:00 -0500
>From: brian duffey <brian.duffey@intelsat.int>
>To: dakota-truck@buffnet.net
>Subject: re: DML: speedo & tires
>Reply-To: dakota-truck@buffnet.net
>
>Hey Jon,
>
>I've been looking at putting some 31x10.5's on my Dak, & since we have
the
>same trucks, can
>you tell me how the fit is with the 31x10.5's?
>Do you have the stock rims?
>Any body/suspension lifts?
>Any idea what the overall diameter for the Generals are?
>I'm looking at going with the BFG Radial AT/TA which have OD of 30.8
inches.
>
>Your comments appreciated - I gotta quit f'ing around and get these
things
>on before the weather gets nasty.
>
>Duff
>'95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
>MSD 6AL - MSD Blaster Coil
>MSD 8.5 wires - K&N FIPK
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:01 EDT