I called em up right after and they gave me bullshit. Saying the light
comming on is irrelevent and that I should check my oil.
Its at the dealer right now to see what the code is. I didnt have any luck
with the 1-2-3 ignition code test thing.
Thanks,
Joel
-----Original Message-----
From: Jon Steiger
Have you taken the truck back to them? From what you're saying, it
sounds like its pretty obvious that they're at fault. They will most
likely remedy the problem for free. It probably wouldn't be a big deal
for them to get the weld off the sensor, then it would just be
a case of putting a new sensor in there. (I think a new O2 sensor
costs $50-70.) Worst case scenario: they can't remove the sensor so
they have to cut the pipe just before the sensor and weld on a
replacement
with an O2 bung welded into the new pipe.
Good luck, I hope you can get this resolved!
-Jon-
.--- stei0302@cs.fredonia.edu
----------------------------------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL
|
| '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447
|
`--------------------------- http://www.cs.fredonia.edu/~stei0302/
---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:23 EDT