Bob and Ryan, the part number for the Eledbrock 14 x 3 air filter
assembly is #1221. You will also need the 1/2" spacer pn#8093 so you
can clear the alternator brace, this is also made by Eledbrock. You
will also need do make a s-bolt that is longer than the stock bolt for
you air hat. I have enclosed a word doc and I hope it looks ok. It
is kinda crude but it will work. Also, the k&n element p/n is 1650.
Shop around maybee you can find an air filter assembly that is cheaper
but with the same spec's as the Eledbrock. If i remember right it ran
me about 50$ for the assembly...Don't quote me on that...
Well Im having problems adding my attachment for somereason. I'll
send it under the title "s-bolt".
By the way the bracket that holds the air hat on actually blocks a
portion of each throttle bore. So this s-bolt can't hurt even if your
using the stock air intake system.
---Mike Sype <blue98dakota@yahoo.com> wrote:
>
> Hey, I'll look up the part numbers when I leave work today and let you
> guys know Monday morning. Mike
>
>
> ---Ryan Krokosinski <eqgroup@equinoxfinancial.com> wrote:
>
> <HR>
> <HTML>
> Has anyone out there used a drop base with their FABM setups on a
5.2 or
> 5.9?
> <BR>I'm trying to get a little more hood clearance for my Ram-Air box
> and
> was
> <BR>wondering if anyone knew "how low I can go" with a drop base
without
> hitting other
> <BR>components. Any input would be much appreciated.
>
> <P>Ryan K
> <BR>'99 R/T RC</HTML>
>
>
>
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:25 EDT