A general search for Internet Racers Supply should have pulled the
correct address. I know i had to snag it that way... Nice site BTW...
> -----Original Message-----
> From: Patrick Delgado [SMTP:dadoctah@worldnet.att.net]
> Sent: Sunday, December 27, 1998 11:04 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: sweet headers for a reasonable price(Jack)
>
> Dude, the reason you can't get that link to work is because I had a
> malfunction in the brain-finger interface connection. the correct
> address-
> http://racenet.net/exh/jba.htm
>
> OOOOOOPPPS! dadoctah@worldnet.att.net
> ----------
> >From: Jack Hilton III <HEMI@charter.net>
> >To: dakota-truck@buffnet.net
> >Subject: Re: DML: sweet headers for a reasonable price(Jason)
> >Date: Sun, Dec 27, 1998, 2:54 PM
> >
>
> >
> >Dude , I can't get that link to work .
> >
> >
> >At 11:33 PM 12/26/98 +0000, you wrote:
> >>I checked a place called Internet Racers Supply
> >>(http://racernet.net/exh/jba.htm) and they have the JBA stainless
> steel
> >>bolt-in headers for the 97 Dakota 5.2 for $374.95 RETAIL! This price
> also
> >>includes S&H to the conus (SH*T! That means I got to pay through the
> nose
> >>for mine). We would better off dealing with these people for our
> group buy.
> >>There was no info on the site about coatings, but I'm sure you could
> ask
> >>about that. Even at that price, I would go for it.If they give
> >>us a group deal, so much the better.
> >>
> >>I saw a dyno test in a mag that the JBA shorties Matched the numbers
> of the
> >>JBA full lenghts. And
> >>I took a look under my truck this afternoon and was checking out the
> Y-pipe.
> >>The factory setup (at
> >>least on the 97's is pretty good. There are nice radii and the
> collector is
> >>well formed. The tubing diameter is not huge but it seems more than
> adequate
> >>for "natural" power.
> >> dadoctah@worldnet.att.net
> >>
> >>----------
> >>>From: Jason Jennings <jason@spray-tech.com>
> >>>To: "'dakota-truck@buffnet.net'" <dakota-truck@buffnet.net>
> >>>Subject: RE: DML: sweet headers for a reasonable price
> >>>Date: Mon, Dec 21, 1998, 4:21 PM
> >>>
> >>
> >>>I called Mr. Jeff Bells inquiring about our DML group purchase for
> the
> >>>JBA headers. He referred me to Joe at ex. 104. It seems Joe will
> be
> >>>handling the purchase of the headers for the DML buyers. He quoted
> me a
> >>>price of $398 in change for stainless non-ceramic coating, and $133
> in
> >>>change or $130 something in change for the ceramic coating plus $16
> for
> >>>shipping & handling. I asked him for a time frame or deadline of
> >>>purchase. He was going with the past group buy. It seems there
> was a
> >>>30 day type of arrangement???? I just wanted to pass the info on.
> >>>Thanks....
> >>>
> >>>
> >>>
> >>>
> >>>Jason
> >>>12/21/98 11:26 AM
> >>>
> >>>
> >>>
> >>>
> >>> -----Original Message-----
> >>> From: Jack Hilton III [SMTP:HEMI@charter.net]
> >>> Sent: Sunday, December 20, 1998 7:23 PM
> >>> To: dakota-truck@buffnet.net
> >>> Subject: RE: DML: sweet headers for a reasonable price
> >>>
> >>>
> >>> Good goin , Bruce !!
> >>>
> >>> I haven't talked to Jeff in a while , and I'll forward this to
> >>>the Dakota
> >>> R/T list too !
> >>>
> >>>
> >>>
> >>>
> >>> At 02:21 PM 12/18/98 -0800, you wrote:
> >>> >DML,
> >>> >For R/T owners, Jeff Bell @ JBA has said that if you order the
> >>>headpipes (2"
> >>> >mandrel bent, 150.00 for chrome, 200.00 for ceramic coating)
> >>>then you can
> >>> >order the headers at the DML group purchase price. Not a bad
> >>>deal if you
> >>> >are interested in shorty headers and cant change the headpipe
> >>>style to a Y
> >>> >(CA smog , CARB etc...)
> >>> >Jeff Bells # @JBA: 619.265-3056x105
> >>> >BKB
> >>> >
> >>> >-----Original Message-----
> >>> >From: Jason Yates [mailto:j_hurricane_y@yahoo.com]
> >>> >Sent: Friday, December 18, 1998 11:54 AM
> >>> >To: dakota-truck@buffnet.net
> >>> >Subject: RE: DML: sweet headers for a reasonable price
> >>> >
> >>> >
> >>> >Another Jason is interested too, although I have a '98 Dak with
> >>>the
> >>> >318. I'd certainly love to be part of a discount like that.
> >>>The DML
> >>> >kicks $#@!
> >>> >
> >>> >Thanks,
> >>> >JY
> >>> >
> >>> >
> >>> >
> >>> >---Jason Jennings wrote:
> >>> >>
> >>> >> I am in if the group wants to buy for the end of Jan........
> >>>Thanks
> >>> >and
> >>> >> keep me in mind please....
> >>> >>
> >>> >>
> >>> >>
> >>> >> Jason
> >>> >> 12/18/98 2:36 PM
> >>> >>
> >>> >>
> >>> >>
> >>> >>
> >>> >> -----Original Message-----
> >>> >> From: Jack Hilton III [SMTP:HEMI@charter.net]
> >>> >> Sent: Friday, December 18, 1998 2:14 PM
> >>> >> To: dakota-truck@buffnet.net
> >>> >> Subject: Re: DML: sweet headers for a reasonable
> >>>price
> >>> >>
> >>> >> We are going to see how many are interested enough to
> >>>approach
> >>> >> JBA for
> >>> >> another group purchase in about the end of January .
> >>> >>
> >>> >> I got the Stainless Steel Ceramic Coated headers for my
> >>>R/T for
> >>> >> like $385
> >>> >> after shipping .
> >>> >>
> >>> >> stay tuned .
> >>> >>
> >>> >>
> >>> >> At 12:52 PM 12/18/1998 -0500, you wrote:
> >>> >> >Does anyone have info on after market headers for a '99
> >>> >> R/T..... I have
> >>> >> >checked out the JBA web site, and it is just a little
> >>>steep for
> >>> >> my
> >>> >> >wallet. I would love to find a nice set of kick ***
> >>>headers to
> >>> >> install,
> >>> >> >and would enjoy them more at a reasonable price.....
> >>>Thanks.
> >>> >> >
> >>> >> >
> >>> >> >
> >>> >> >Jason
> >>> >> >12/18/98 12:55 PM
> >>> >> >
> >>> >> >
> >>> >> >
> >>> >> >
> >>> >> >
> >>> >> Jack Hilton
> >>> >>
> >>> >> HEMI@charter.net
> >>> >>
> >>> >>
> >>> >
> >>> >_________________________________________________________
> >>> >DO YOU YAHOO!?
> >>> >Get your free @yahoo.com address at http://mail.yahoo.com
> >>> >
> >>> >
> >>>
> >>>
> >>> W . Jack Hilton III
> >>>
> >>> HEMI@charter.net
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> >W . Jack Hilton III
> >
> >HEMI@charter.net
> >
> >
> >
> >
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:31 EDT