>Spedo cable lube!
>You probably will have to remove it at the tranmission end, remove a
>keeper from the gear if it has one, pull out the core (its dirty) wipe
>it clean of grit (solvent may be helpful) and re grease it (I use wheel
>bearing grease) and push it back in the housing (you may have to rotate
>it as you push), reinstall the gear and remount the end back into the
>transmission. It usually works for me and last a long time.
Yup, only I use CV joint lube. Itīs less viscous, and seems to do a better
job of lubing things that donīt get regular attention.
Jim
ī93 4x4 CC V8
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:53 EDT