Gary Shook wrote:
>
> >rented and saw-zaw to remove the existing exhaust. I highly recommend this
> >method. It beats the hell out of heating up the joints, etc. Also, if I
> <snip>
>
> If you have access to a compressor, I recommend using an air hammer- no
> metal filings dropped into the exhuast, and pipe should be reuseable. If
> you do, get earplugs!
>
> Gary Shook
I used a 4" wafer cut off wheel on a 90 degree air grinder. Bob Nichols
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:56 EDT