Many thanks for the quick response Frank.
Let me answer some of your questions:
> Do you know if they did
> any machine work on the bores, and did they have the shaft out of the TB???
Yes, they did do some bore work. They milled the bores down
to the butterflys, with the shaft and butterfly plates out.
They also put (red) loctite on the SS screws.
> How about this,
> we can ship you a TB to use, you ship us yours and I will go through it. We
> can shave the top, and at minimum polish out the bores, if the compression
> area of the bores need to be opened up even further, we can do that, at the
> same time I can install the new SS shaft for you and ship it back out. Then
> just return our TB back to us.
I had no idea you could ship me one to use while you worked on
mine. That will work! Let me know what I need to do $ wise. E-mail
me direct if you want, Digest mode is a little slow.
Thanks again Frank
GS -
98 5.2L 5spd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:11:56 EDT