On Internet Racer's Supply's web page they list several cams for the magnum
engines from Competition Cams .
They list this one as the best for a 360 for performance :
Part Number:20-604-8
Application: Best performance cam for 360
Magnum engine. Works with
stock computer.
Duration at .050":210/220
Lift:.512/.512
Lobe Sep:112
RPM Range:900-5200
$245.95
At 12:36 PM 1/20/1999 -0600, you wrote:
>>
>> Anyone know the specs for an R/T cam? How about a stock R/Tcam? How
>>much difference in lift/duration? Your cam is even bigger? How do you
>>pass emissions? Alan S.
>>
>
>
>Specs....MP Cam....P5249549
>
>.458"/.467" lift
>
>204/208 duration at .050"
>
>with 1.6 rockers
>
>
>The R/T uses a stock 5.9L cam out of the Ram if I remember right...it has
>low .4xx lift or high .3xx lift...can't remember.
>
>Here's a kicker. The 380 horse crate motor cam is supposed to fit in the
>Magnums.
>
>Verbatim from the MP catalog:
>
>"Hydralic roller cam designed for 1992-98 Magnum engines or 300/380 Magnum
>Crate Engines. Features .501"/.513" lift and 288-292 duration."
>
>P4876348
>
>Now, I'm guessing that this is with 1.6 rockers, too. Duration at .050" is
>???. I don't really know though. As far as emissions and crap, I have no
>idea if the crate motor cam will pass, but the R/T cam should(and is
>CARB/EPA legal), although it says 92/97 on years that it will fit. It's
>probably just a misprint and they left out 98.
>
>
>Brian
>
>
>
----------------------------------------------
Jack Hilton III
Black 1998 Dodge Dakota R/T Club Cab
Charter Pipeline......the Next Wave.....
http://webpages.charter.net/hemi/jbd1.html
----------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:08 EDT