What about the specs on the V6 Cams...(Stock, Performance, anything??)
> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Jim, Donna,
> Erin, and Brian
> Sent: Wednesday, January 20, 1999 12:37 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: mopar cam for magnum engines
>
>
> >
> > Anyone know the specs for an R/T cam? How about a stock R/Tcam? How
> >much difference in lift/duration? Your cam is even bigger? How do you
> >pass emissions? Alan S.
> >
>
>
> Specs....MP Cam....P5249549
>
> .458"/.467" lift
>
> 204/208 duration at .050"
>
> with 1.6 rockers
>
>
> The R/T uses a stock 5.9L cam out of the Ram if I remember right...it has
> low .4xx lift or high .3xx lift...can't remember.
>
> Here's a kicker. The 380 horse crate motor cam is supposed to fit in the
> Magnums.
>
> Verbatim from the MP catalog:
>
> "Hydralic roller cam designed for 1992-98 Magnum engines or 300/380 Magnum
> Crate Engines. Features .501"/.513" lift and 288-292 duration."
>
> P4876348
>
> Now, I'm guessing that this is with 1.6 rockers, too. Duration
> at .050" is
> ???. I don't really know though. As far as emissions and crap, I have no
> idea if the crate motor cam will pass, but the R/T cam should(and is
> CARB/EPA legal), although it says 92/97 on years that it will fit. It's
> probably just a misprint and they left out 98.
>
>
> Brian
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:09 EDT