the stall converter helps bypass most of the low-end lag, and the 4.10 gears
take care of the rest... The computer can handle the cam no problem.
VLADIMIR
96 Indy "FASRAM"
http://home.austin.rr.com/fasram/
http://www.indyram.org/
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Kabuki2@aol.com
Sent: Thursday, January 21, 1999 1:42 PM
To: dakota-truck@buffnet.net
Subject: Re: RE: DML: mopar cam for magnum engines
In a message dated 1/20/99 3:38:24 PM, you wrote:
<<That's an awefully small cam. I mean, if you are gonna do it, do it right
I
always say.>>
You could probably go alittle bit more radical, but I wouldn't. Anything
bigger and the computer would probably have a fit. The Mopar Perf SBEC is a
good idea with this cam, as it's real easy to tap the factory rev limiter.
:/
The midrange-top end pull on this cam is awesome .. it does sacrifice a
little
bit of low end, though.. which should be expected.
ttyl
Patrick
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:10 EDT