has not happened so far... wish me luck...
VLADIMIR
96 Indy "FASRAM"
http://home.austin.rr.com/fasram/
http://www.indyram.org/
-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
Kabuki2@aol.com
Sent: Friday, January 22, 1999 12:29 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: mopar cam for magnum engines
In a message dated 1/21/99 8:09:12 PM Pacific Standard Time,
vladimir@austin.rr.com writes:
<< the stall converter helps bypass most of the low-end lag, and the 4.10
gears
take care of the rest... The computer can handle the cam no problem. >>
I run the stock converter, but it does seem to need a little bit more
converter and gear... I currently run a 4.10 ring and pinion, but it just
doesn't seem to do the job of getting my full size truck to move from a
stoplight the way it should ...
I know the computer can handle that cam (.512/.512" lift, 210/220 dur @
.050"
lift) ... That's the cam I run in my truck. I was just trying to say that if
you try and run anything more radical, the computer might throw a fit ..
ttyl
Patrick
surf.to/rdperformance
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:12 EDT