Hey Jon,
I'm thinking about a set of the older covers, and just drilling the
additional holes. Do you know if the flanges are reinforced at the bolt
holes? Thanks,
Rich - Ashburn, VA
-----Original Message-----
From: Jon Steiger [mailto:stei0302@cs.fredonia.edu]
Sent: Monday, January 25, 1999 9:05 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Valve Covers
At 07:42 PM 1/25/99 -0600, you wrote:
>P5249343 for the black ones or P4876041 for polished ones. I have the
black
>ones on my 99 R/T. These covers fit all 318/360 MAGNUM engines from 92 up.
>These are 20 screw covers, the older non magnum engines used 10 screws.
>Jim in Waco
>
I could be wrong, but I think the magnum covers are 10 bolt, and the older
ones are 5. BTW, the older ones will fit on a Magnum head with a good
gasket maker!
-Jon-
.--- stei0302@cs.fredonia.edu ------------------------------------.
| Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
| '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
`----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:15 EDT