I have the pictures, but haven't scanned them in yet. The wheels are Weld
VR 27 Tomahawks. I will try and get them scanned in this weekend if all
goes well.
Randy
Temple Tx..
>Date: Mon, 25 Jan 1999 21:50:17 -0500
>From: Mark Kuzia <flyboy01@worldnet.att.net>
>Subject: Re: DML: Wheel back-spacing(Mark)
>
>Randy,
>
>What kind of wheels were they? Do you have a picture of your truck posted
>anywhere? I'd like to see it.
>
>Mark
>http://home.att.net/~flyboy01/
>
>- -----Original Message-----
>From: Randy David <rdavid@vvm.com>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Monday, January 25, 1999 8:34 PM
>Subject: Re: DML: Wheel back-spacing(Mark)
>
>
>>I am running 17X8 wheels with 6" of backspacing, with a 255/50/17 tire on
>my
>>Dak. It is also lowered 2" in the front and 3" in the rear. The sidewall
>>is nearly flush with the fenderwells, I have no problems with clearance
>>while turning from lock to lock
>
>>Randy
>>Temple Tx...
>>
>>>From: Mark Kuzia <flyboy01@worldnet.att.net>
>
>>>Help,
>>>I'm buying a new set of wheels for my 99' Dakota Sport.
>>>1. I need to know the stock backspacing with the 15x7, 15x8 (what I
have),
>>and
>>>the R/T 17x9 wheels.
>>>2. Has anyone run into tire clearance problems with bigger wheels? I'm
>>>lowering the truck 1" front/3" rear.
>>>3. What is the minumum and maximum backspacing for the 16x8 wheels?
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:15 EDT