The kit is a kinda home made
I started with a used IROC tpi nos plate system and took the 2 nozzles from
the plate system and installed them in my intake below the throttle body.
Then i bought a carter elec pump and a russell fuel bung and installed that
fitting in the tank to support a separate fuel supply for the nos (i dont
beilieve in using the stock system to support the motor and noxide)
The bottle went behind the seat and the wiring was basic(a triggering switch
and pushbutton)
as far as the jetting I have to remove some lines from the nozzles (forgot
what was there)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:33 EDT