RE: was: nx's nitrous kit for the 318 & 360 Fastest?

From: Vladimir Ryall (vladimir@austin.rr.com)
Date: Mon Feb 08 1999 - 23:08:02 EST


Jon,

I am running a fogger nozzle tapped into the top of my ram-air box. it
shoots straight down into the TB from about 2 inches above. It is the
newest type of nozzle that really atomizes the fuel. I have had no problems
so far, but, I am still playing with the jet sizes to see what works best.
I am getting about 130hp to the wheels out of supposedly 100hp jets. I
guess that's a pretty good return on investment.

Vladimir "FASRAM"
http://home.austin.rr.com/fasram/
http://www.indyram.org/

-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Jon Steiger
Sent: Saturday, February 06, 1999 6:01 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: was: nx's nitrous kit for the 318 & 360 Fastest?

At 05:34 PM 8/21/98 -0500, you wrote:
[...]
>>By the way Tom, what size jets do you use? I have started experimenting
>>with different ones. What's the secret Tom?
>>
>>Vladimir "FASRAM"
>
>My kit is different you know Vlad because of the m1. But I strictly adhere
>to the jets mandated by NX. They claim more research into their kits than
>anyone else & that the fuel req's are dead on and not to play w/any other
>jets. So far everything they have claimed has been dead on. I picked up
>more mph w/my kit than all my buddies mustangs w/brand-x kits given the
same
>hp shot,--& that's in a truck w/an automatic.
>

    Did they offer a choice between the jets and a spray bar under the
TB? I was sort've leaning toward a bar... Anyone know which offers
better distribution? Obviously the best solution would be a fogger type
nozzle above each cylinder, but I'm not lookin' to invest that much
into it at this point. If they don't offer a bar, or if the jets are better
than a bar, maybe I'll just tap a hole for some jets in a carb spacer. (I
have a ram-air hood and a sealed airbox, so using jets in front of the TB
is problematic. Plus, I'd like to keep the fuel as far down into the engine
as possible.)

                                               -Jon-

  .--- stei0302@cs.fredonia.edu ------------------------------------.
  | Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
  | '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
  `----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:33 EDT