On Fri, 19 Feb 1999, Jason Jennings wrote:
> This will fit a 360, I am going to assume the 318 has the same pulley
> sizes. I never worked on my 318 Ram 1500. It should work just fine
> though. Try looping a string around the pulleys, minus the power
> assistance and A/C. Note, BIG NOTE.... The free spin pulley above the
> water pump is routed in the opposing direction with the short belt. The
> water pump will still spin the right way as long as you measure it this
> way. This is the only pulley that changes directions. This is for
> measuring purposes. Once you get the belt. you will notice it can only
> fit one way. You should have a diagram under the hood for a 318 minus
> A/C, and with A/C. Notice when you remove the A/C and the power
> assistance you need to change the looping on that one pulley above the
> water pump and to the passenger side of the A/C. I love my short belt.
> I shaved off a tenth or so with the belt alone. I needed to lower tire
> pressure for traction though. I only recommend this belt for track use.
> I sux parking a R/T without power assistance. Good Luck, Have Fast Fun.
Hmmmm... I'm going to have to check on that idler pulley routing.
Maybe that's why I could never find a belt that would bypass both
P/S and A/C. I currently use a Dayco 670 K6 for power steering
bypass. I think most of the power gain comes from the P/S bypass,
but having a little less rotating mass in there can't hurt! :-)
By the way, here's a diagram of the proper routing which might help
to picture what Jason was talking about above:
http://www.cs.fredonia.edu/~stei0302/WWW/DAKOTA/UPGRADES/TSTAT/15.gif
>
> " 5060538 Dayco belt "
> -This translates into a 6 rib belt that is 53.8" long.
Are you sure its a Dayco? (That looks like a Gates part number.)
-Jon-
.--- stei0302@cs.fredonia.edu ----------------------------------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
`--------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:39 EDT
