OOPS!
I almost forgot, lug pattern is 6 x 4.5" from 1992 to 1999.
Mark
http://home.att.net/~flyboy01
-----Original Message-----
From: Mark Kuzia <flyboy01@worldnet.att.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Friday, February 19, 1999 10:10 PM
Subject: Re: Wheel question
>The stock Dakota wheels are as follows:
>
>15x7= 4.5 back space
>15x8= 5.5 back space
>17x9= 6.5 back space
>
>I have collected a lot of info on wheel sizing for the Dakotas, e-mail me
if
>you have more ?'s.
>
>Mark
>flyboy01@worldnet.att.net
>
>-----Original Message-----
>From: Jason Jennings <jason@spray-tech.com>
>To: 'DML' <dakota-truck@buffnet.net>
>Date: Friday, February 19, 1999 11:26 AM
>Subject: DML: Wheel question
>
>
>>Would the bolt circle be the measurement between each rim hole??? I
>>have noticed most places describe their rims in Diameter, width,
>>backspacing, bolt pattern, and bolt circle. Are the bolts basically the
>>same diameter on ever car just different thread patterns???? I was
>>nervous about buy a set of rims and have the lug hole diameters too
>>small or too large for mounting. I haven't seen a description that
>>gives the rim in terms of this diameter. I suppose it would real be the
>>circumference, kinda makes sense this way. Thanks....
>>
>>
>>
>>Jason
>>2/19/99 11:18 AM
>>
>>
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:39 EDT