Re: Squeaks from lower A-arm

From: GrnDak4x4@aol.com
Date: Sun Feb 28 1999 - 00:15:46 EST


In a message dated 2/27/99 10:15:46 PM Central Standard Time, Kb5lcl@aol.com
writes:

<< Anybody had the problem with lower A-arm bushing
 squeaking real bad, Driving me nuts. Only 30K
 I will take to dodge dealer to see if they will warranty?
 They may say sorry, but we can't warranty a lowered truck.
 But what does that have to do with a bad bushing??
 If anyone has had same problem or know of a TSB,
 Please post. >>

Well not sure if this helps, but if the dealer doesnt want to fix the squeak,
I have seen on the Mopar Performance web site a set of control arm bushings
that are polyurethane; this may/maynot help. Not sure what year Dak they were
for, but check it out. Maybe also you could try using a good quality lithium
waterproof grease on the inside of the bushings to quiet them down; I think
this would work the best. Good Luck.
Kyle
93 Dakota 4x4 V6



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:46 EDT