RE: Re: Power Outlet?

From: Michael Stepka (mstepka@genesisdj.com)
Date: Sun Feb 28 1999 - 22:09:01 EST


Thanks for your help...

-----Original Message-----
From: owner-dakota-truck@buffnet4.buffnet.net
[mailto:owner-dakota-truck@buffnet4.buffnet.net] On Behalf Of David Henry
Sent: Saturday, February 27, 1999 4:14 PM
To: 'DML'
Subject: DML: Re: Power Outlet?

Here's a couple of ideas:

1. Run a wire from the power outlet to an unused fuse hole (If you have
empty ones), and insert a fuse. Check to make sure that the empty fuse
hole has power on one of the terminals even when the ignition is off.
 (I've moved the circuit breaker for the power windows to a new location
and moved the feed to the windows in back of the fuse block. Now my
windows work without needing to start the engine)

2. Find out what fuse the power outlet is on and what else is there. Move
the non power feed wire to an empty location with power always on. This
will cause everything on the circuit to work without the ignition on.
 Don't know if there's anything you don't want to run this way.

3. Get an auxiliary fuse block, and run a power feed from the battery (or
power distribution center) to it. Drill hole and insert grommet in the
firewall. This is also good if you will be adding more electrical stuff
later.

Let me know if you want more details / specifics.

David Henry '94 CC 4x4 318 5Spd in MI

> Date: Mon, 22 Feb 1999 22:42:24 -0500
> From: Michael Stepka <mstepka@genesisdj.com>
> Subject: DML: Power Outlet?
>
> Hello. I Have a 98 Dakota Sport, and just wondering if anyhow knows how
I
> can get the power outlet or cigarette lighter to work when the ignition
is
> not on. On my last car I was able to keep my cell phone charging even
when
> the car wasn't running, but on the truck it only works when the ignition
is
> on. Any ideas? Thanks.
>
> Mike
> Mstepka@genesisdj.com
> www.genesisdj.com/truck.html



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:47 EDT